meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ppaccessories [2022/08/23 01:32]
flynx updated location of phosh.service.d
ppaccessories [2022/09/25 09:56]
biketool add megi tools links
Line 10: Line 10:
   * You cannot see the charger capacity in settings   * You cannot see the charger capacity in settings
   * The Charger defaults to charging at 500 mA, so it may not be enough to charge the phone when in operation   * The Charger defaults to charging at 500 mA, so it may not be enough to charge the phone when in operation
-  * You need to `modprobe i2c-dev` to use megi's tools. They also need to be compiled from source, as the release version segfaults+  * You need to `modprobe i2c-dev` to use megi's tools(link megi tools guide or documentation in wiki, git, or discussion). They also need to be compiled from source, as the release version segfaults
   * Fn+F8 and Fn+F10 Alias to = with the kernel driver.   * Fn+F8 and Fn+F10 Alias to = with the kernel driver.
  
Line 117: Line 117:
 After this, the top row symbols will be available as L3-{0-9}. The L3 key can be configured in settings -> keyboard -> Alternative Characters Key. After this, the top row symbols will be available as L3-{0-9}. The L3 key can be configured in settings -> keyboard -> Alternative Characters Key.
  
-== Daemon == 
- 
-There is a system daemon to do both of the above actions automatically on keyboard detection available on [[https://​gitlab.com/​undef1/​kbd|GitLab]]. Use of this is not required but can be helpful if you often forget the above.